13.
Others
396
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
•
There may be defective pixels in the image sensor.
>
Perform [Pixel Refresh]
(P68)
.
•
Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color.
(P98)
•
Is your finger covering up the speaker?
(P19)
•
If you continue to use the same card after changing [System Frequency]
(P220)
, motion
pictures may not be recorded. To record with the same card, reset [System Frequency] to the
original setting. To record motion pictures with the current setting, try the following:
–
Perform formatting
(P68)
on this unit after saving necessary data on a PC, etc.
–
Insert a different card.
•
You may not be able to record for a short while after turning this unit on when using a large
capacity card.
The brightness or the hue of the recorded picture is different from the actual
scene.
Bright spot not in subject is recorded.
Subject cannot be locked.
(AF tracking not possible)
Operation sound is small.
Motion pictures
Recording motion pictures is not possible.
