41
2. Getting Started/Basic Operations
∫
Notes on automatic viewfinder/monitor switching
Bring your eye or an object near the viewfinder to automatically switch to the viewfinder
display using the eye sensor.
• To reduce the battery consumption, set [Power Save LVF Shooting] in [Economy]
• Eye sensor might not work properly depending on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around the eyepiece. In that case, press [LVF] to switch
the display.
• During motion picture playback or a slide show, the camera does not automatically switch the
display to the Viewfinder with the eye sensor.
• The eye sensor does not work depending on the angle of the monitor.
The shutter button works in two steps.
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
C
Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not achieved, except
when set to flash.)
• Once the subject is in focus, the focus indication is displayed.
(When the subject is not in focus, the indication flashes.)
Press the shutter button fully (push it in further), and
take the picture.
Shutter button (Taking pictures)
• Pictures cannot be taken until focus is achieved when [Focus/Release Priority] is set to
[FOCUS].
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
60
60
60
3.5
3.5
3.5
