Panasonic AW-UE100 Скачать руководство пользователя страница 78

Страница: 78 / 180

Preset Acceleration screen

Preset Acceleration

Preset Acceleration Auto

Rise S-Curve 15

Fall S-Curve 15

Rise Acceleration 128

Fall Acceleration 128

Rise Ramp Time 0.1s

Fall Ramp Time 0.1s

Return

Preset Acceleration [Manual, Auto]

Sets whether to perform advance setting for acceleration and

deceleration speed etc. during start/stop of preset playback.

Manual

Makes the advance settings for acceleration speed etc.

when starting/stopping preset playback.

Auto

Automatically operates acceleration speed etc. when

starting/stopping preset playback.

Rise S-Curve [0 to 30]

Sets the S-curve for pan/tilt acceleration operation in 31 steps. (The S

becomes stronger, the greater the number)

During the acceleration operation for operating at the specified speed

or time during pan/tilt operations by preset playback, the acceleration

process is performed using the S-curve specified in this setting.

This is enabled only when [Preset Acceleration] is [Manual].

<NOTE>

• In order to limit the acceleration response, in the S-curve step, as

the acceleration speed rises, the limit is automatically applied.

Fall S-Curve [0 to 30]

Sets the S-curve for pan/tilt deceleration operation in 31 steps. (The S

becomes stronger, the greater the number)

During the fall acceleration operation for operating at the specified

speed or time during pan/tilt operations by preset playback, the

deceleration process is performed using the S-curve specified in this

setting.

This is enabled only when [Preset Acceleration] is [Manual].

<NOTE>

• In order to limit the deceleration response, in the S-curve step, as

the deceleration speed rises, the limit is automatically applied.

Rise Acceleration [1 to 255]

Sets the acceleration speed for pan/tilt acceleration operation in 255

steps. (The acceleration speed increases as the number increases)

During the acceleration operation for operating at the specified speed

or time during pan/tilt operations by preset playback, the acceleration

process is performed using the acceleration speed specified in this

setting.

This is enabled only when [Preset Acceleration] is [Manual] and

[Preset Speed Unit] is [Speed Table].

<NOTE>

• As the speed specified for [Preset Speed] is given priority as the

maximum speed attained in preset playback, if the acceleration

speed specified here is small, this functionality may not operate as

specified.

Fall Acceleration [1 to 255]

Sets the deceleration speed for pan/tilt deceleration operation in 255

steps. (The deceleration speed increases as the number increases)

During the deceleration operation for operating at the specified speed

or time during pan/tilt operations by preset playback, the deceleration

process is performed using the deceleration speed specified in this

setting.

This is enabled only when [Preset Acceleration] is [Manual] and

[Preset Speed Unit] is [Speed Table].

<NOTE>

• As the speed specified for [Preset Speed] is given priority as the

maximum speed attained in preset playback, if the deceleration

speed specified here is small, this functionality may not operate as

specified.

Rise Ramp Time [0.1s to 10.0s]

Sets the acceleration time for the time specific operation during preset

playback. (Sets between 0.1 s to 10.0 s in 0.1s increments)

This is enabled only when [Preset Acceleration] is [Manual] and

[Preset Speed Unit] is [Time].

<NOTE>

• As the time specified in [Preset Speed] takes precedence as the

total time for preset playback, if the time specified here is more than

half of the time specified in [Preset Speed], this functionality will not

operate as specified.

• When the acceleration operation cannot be performed within the

specified time even at maximum acceleration speed of the device,

the operation will not be performed by the specified time.

Fall Ramp Time [0.1s to 10.0s]

Sets the deceleration time for time specified operations during preset

playback. (Sets between 0.1 s to 10.0 s in 0.1s increments)

This is enabled only when [Preset Acceleration] is [Manual] and

[Preset Speed Unit] is [Time].

<NOTE>

• As the time specified in [Preset Speed] takes precedence as the

total time for preset playback, if the time specified here is more than

half of the time specified in [Preset Speed], this functionality will not

operate as specified.

• When the deceleration operation cannot be performed within the

specified time even at maximum fall deceleration of the device, the

operation will not be performed by the specified time.

Return

Return to the previous menu level.

Camera menu items (continued)

Содержание AW-UE100





















































































































































































Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды

Panasonic AW-UE100, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды