Panasonic AW-UE100 Скачать руководство пользователя страница 70

Страница: 70 / 180

Output 5/5 screen

Output 5/5

OSD Off With R-Tally Off

OSD Status Off

Tally Enable

Tally Brightness Low

Status Lamp Enable

External Output

Output1 Off

Output2 Off

Return

OSD Off With R‑Tally [Off, On]

Off or on the function that turns off camera menu, status, crop frame

and other displays when red tally signals are received via commands

or contacts.

When the red tally signal releases, the camera menu display will

return.

OSD Status [Off, On]

Turn the status display during AWB and ABB off/on, or error display

when an error occurs.

Tally

[Enable, Disable]

[Disable] or [Enable] is set here for the function which turns on or

turns off the tally lamp using the tally control signal.

Tally Brightness [Low, Mid, High]

Adjust the brightness of the tally LED.

Status Lamp

[Enable, Disable]

[Disable] or [Enable] is set here for the status display lamp.

When you want the status display lamp to stay off while this unit is in

operation, set to [Disable].

<NOTE>

• Even when set to [Disable], the status display lamp may light

up when this unit is starting up, updating firmware, or trouble is

occurring.

External Output

Select the signal type output from the External Output signal lines

(Output1, Output2) of the RS‑422 connector. (→ page 18)

Output1 [Off, R‑Tally, G‑Tally]

Output2 [Off, R‑Tally, G‑Tally]

Off

Signal is not output.

R-Tally

The reception status of the red tally signal is output.

G-Tally

The reception status of the green tally signal is output.

Return

Return to the previous menu level.

UHD Crop 1/2 screen

UHD Crop 1/2

3G SDI Out Crop

NDI Out Crop

IP Out1 Crop

IP Out2 Crop

Crop Marker YL+G+MG

Return

3G SDI Out [Full, Crop]

Make the settings for Full/Crop for images output to the 3G SDI OUT

connector.

Full

FHD down-converted images are output as is without

cropping UHD images.

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

NDI Out [Full, Crop]

Makes the settings for Full/Crop for images output to NDI

transmission (LAN connector).

Full

FHD down-converted images are output as is without

cropping UHD images.

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

IP Out1 [Full, Crop]

IP Out2 [Full, Crop]

Makes the settings for Full/Crop for images output to H.264/H.265/M-

JPEG transmission (LAN connector).

Setting specified in [IP Out1] is applied to images transmitted by each

transmission CH1(H.264(1), H.265(1), JPEG(1)).

Setting specified in [IP Out2] is applied to images transmitted by each

transmission CH2 to CH4(H.264(2) to (4), H.265(2) to (4), JPEG(2)

to (3)).

Full

FHD down-converted images are output as is without

cropping UHD images.

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

When the [Streaming mode] on the web screen is [NDI|HX], [IP Out1]

and [IP Out2] will have a linked operation.

Camera menu items (continued)

Содержание AW-UE100





















































































































































































Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды

Panasonic AW-UE100, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды