Panasonic AW-UE100 Скачать руководство пользователя страница 131

Страница: 131 / 180

3G SDI Out [Crop, FULL]

Make the settings for Crop/FULL for images output to the 3G SDI

OUT connector.

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

FULL

FHD down-converted images are output as is without

cropping UHD images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Crop

NDI Out [Crop, FULL]

Makes the settings for Crop/FULL for images output to NDI

transmission (LAN connector).

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

FULL

FHD down-converted images are output as is without

cropping UHD images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Crop

IP Out1 [Crop, FULL]

IP Out2 [Crop, FULL]

Makes the settings for Crop/FULL for images output to H.264/H.265/

M-JPEG transmission (LAN connector).

Setting specified in [IP Out1] is applied to images transmitted by each

transmission CH1(H.264(1), H.265(1), JPEG(1)).

Setting specified in [IP Out2] is applied to images transmitted by each

transmission CH2 to CH4(H.264(2) to (4), H.265(2) to (4), JPEG(2)

to (3)).

Crop

Images with FHD cropped from UHD images are output.

The images output in this case are those with the crop

frame specified in [Crop Out].

FULL

FHD down-converted images are output as is without

cropping UHD images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

When the [Streaming mode] is [NDI|HX], [IP Out1] and [IP Out2] will

have a linked operation.

Factory settings:

Crop

Crop Marker [Off, Yellow, Green, Magenta, Green,

Magenta, Green+Magenta, Green+Magenta]

Makes the settings for the crop frame displayed for images output to

12G SDI OUT, 3G SDI OUT, HDMI and LAN connectors.

Off

Crop frame is not displayed.

Yellow

Only a yellow crop frame is displayed.

Green

Only a green crop frame is displayed.

Magenta

Only a magenta crop frame is displayed.

Green

Yellow and green crop frames are displayed.

Magenta

Yellow and magenta crop frames are displayed.

Green+

Magenta

Green and magenta crop frames are displayed.

Green+

Magenta

Yellow, green, and magenta crop frames are

displayed.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Green+Magenta

Crop Output Select [Yellow, Green, Magenta]

Make the settings for the crop frame for images output to the 3G SDI

OUT connector and IP.

Yellow

Output the yellow crop frame images.

Green

Output the green crop frame images.

Magenta

Output the magenta crop frame images.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Yellow

<NOTE>

• The color frame specified in [Crop Output Select] will be a deeper

shade when compared to other colors used for frames.

Crop Adjust [Yellow, Green, Magenta]

Make selections for the crop frame to adjust positioning.

The position of the selected crop frame can be adjusted with the

control pad displayed in the Crop Adjust area.

Yellow

Make position adjustments for the yellow crop frame.

Green

Make position adjustments for the green crop frame.

Magenta

Make position adjustments for the magenta crop

frame.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

Yellow

<NOTE>

• The color frame specified in [Crop Adjust] will be thicker when

compared to other color frames.

X [0 to 2560]

Make settings for the position in the horizontal direction for the crop

frame specified in [Crop Adjust].

The variable range is 0 to 1920 when [Crop Mode] is [Crop(1080)],

with 0 as the left edge and 1920 as the right edge, and only even

numbers can be set.

The variable range is 0 to 2560 when [Crop Mode] is [Crop(720)],

with 0 as the left edge and 2560 as the right edge, and only even

numbers can be set.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

960

Y [0 to 1440]

Make settings for the position in the vertical direction for the crop

frame specified in [Crop Adjust].

The variable range is 0 to 1080 when [Crop Mode] is [Crop(1080)],

with 0 as the upper edge and 1080 as the lower edge.

The variable range is 0 to 1440 when [Crop Mode] is [Crop(720)],

with 0 as the upper edge and 1440 as the lower edge.

This is only enabled when [Crop Mode] is set to [Crop(1080)] or

[Crop(720)].

Factory settings:

540

130

131

Web screen configurations (continued)

Содержание AW-UE100





















































































































































































Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды

Panasonic AW-UE100, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды