Panasonic AW-UE100 Скачать руководство пользователя страница 115

Страница: 115 / 180

Unicast port(Image) [1024 to 50000]

Enter the unicast port number (used when sending images from the

unit).

Only even numbers can be specified.

The port number cannot be set to 10670.

Factory settings:

H.264(1): 32004

H.264(2): 32014

H.264(3): 32024

H.264(4): 32034

Unicast port(Audio) [1024 to 50000]

Only even numbers can be specified.

The port number cannot be set to 10670.

Factory settings:

H.264(1): 33004

H.264(2): 33014

H.264(3): 33024

H.264(4): 33034

<NOTE>

• The unicast port number must be configured when [Transmission

type] is set to [Unicast port(MANUAL)].

Multicast address

[IPv4: 224.0.0.0 to 239.255.255.255

IPv6: Multicast address starting with FF]

Enter the multicast IP address.

Images and audio will be sent to the specified IP address.

Factory settings:

H.264(1): 239.192.0.20

H.264(2): 239.192.0.21

H.264(3): 239.192.0.22

H.264(4): 239.192.0.23

<NOTE>

• Verify usable multicast IP addresses before entering this setting.

• This setting does not work with the multicast address for link local

scope.

Multicast port [1024 to 50000]

Enter the multicast port number (used when sending images from the

unit).

Only even numbers can be specified.

The port number cannot be set to 10670.

Factory settings:

37004

<NOTE>

• When sending audio from the unit, a port number with “1000” added

to the multicast port number will be used.

Multicast TTL/HOPLimit [1 to 254]

Enter the TTL/HOPLimit value for multicast.

Factory settings:

<NOTE>

• When transmitting H.264 images via the Internet, transmitted

images may not appear depending on proxy server settings, firewall

settings, etc. In such cases, consult your network administrator.

• When displaying multicast images on a personal computer with

multiple LAN cards installed, disable the LAN cards that are not

used for reception.

H.265

Set H.265 image settings.

The setting is confirmed with the [Set] button.

<NOTE>

• H.265 format images cannot be displayed in the live screen [Live] of

the unit.

• Use external devices and software compatible with H.265 images to

display H.265 images.

• When starting RTSP/RTP transmissions, set the following URLs for

the decoders and applications.

- For H.265(1):

rtsp://[unit’s IP address]/MediaInput/h265/stream_1

- For H.265(2)

rtsp://[unit’s IP address]/MediaInput/h265/stream_2

[/MediaInput/h265/stream_

] can be changed in [RTSP] of

[Advanced].

(→ page 147)

H.265 transmission [On, Off]

Whether to transmit the H.265 images is set here.

Factory settings:

Image capture size [3840×2160, 1920×1080, 1270×720,

640×360]

Select the resolution for H.265 images.

Selectable options will vary depending on the selected resolution

setting.

H.265(1)

3840×2160, 1920×1080, 1270×720

H.265(2)

1920×1080, 1270×720, 640×360

Factory settings:

H.265(1): 1920×1080

H.265(2): 1280×720

<NOTE>

• [3840×2160] can be selected when the [Streaming mode] is

[H.265(UHD)].

114

115

Web screen configurations (continued)

Содержание AW-UE100





















































































































































































Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды

Panasonic AW-UE100, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE100

Отзывы:

Похожие инструкции для AW-UE100

Бренды по названию

Популярные бренды