98
Web screen configurations
(continued)
Freeze During Preset
Turn the function for freezing images during preset
playback Off/On.
When this is set to “On”, preset playback is performed
with a still of the image immediately preceding the start
of preset playback being output. The image freeze is
released when preset playback is finished.
Factory settings: Off
●
When this is set to “On”, the start of preset
operations may be delayed momentarily due to the
image being frozen.
●
When HDR is set to “Low” or “High”, this is set to
“Off”.
Notes
Zoom Mode
Configure the maximum zoom magnification.
Setting value:
Opt.Zoom
Use only the optical zoom. Up to 20× optical
zoom is possible.
i.Zoom
Enable the i.Zoom function.
Enabling this function allows you to perform
electronic zoom while reducing drops in picture
quality.
Combining optical zoom and electronic zoom,
up to 30× zoom is possible.
D.Zoom
Enable the digital zoom function.
Picture quality degrades as zoom increases
with digital zoom.
Factory settings: i.Zoom
Max Digital Zoom
Set the maximum digital zoom magnification.
This is only enabled when Zoom Mode is set to “D.Zoom”.
Setting range: ×2 to ×12
Factory settings: ×12
D.Extender
Set the digital extender function Off/On.
Factory settings: Off
When this function is enabled, the video magnification
set with the “D. Extender Magnification” (digital zoom) is
further increased. You can use this function to temporarily
enlarge the image for confirmation of focus and such.
D.Extender Magnification
Set the magnification for the digital extender function.
Setting value: ×1.4, ×2.0, ×4.0, ×6.0, ×8.0
Factory settings: ×1.4
OIS
Set the optical image stabilization function.
Setting value:
Off
Image stabilization function not used.
Mode1
Image stabilization function used (optical, 2-axis
compensation)
Mode2
Image stabilization function used
(electronic, 4-axis compensation)
Factory settings: Off
●
“Mode2” cannot be selected when HDR is “Low” or
“High”.
●
When “Mode2” is selected, the view angle
changes to set aside image pixels for use during
compensation.
●
When “Mode2” is selected, display of the output
image is delayed compared to the actual image.
●
Although the image stabilization of “Mode2” (hybrid
of optical and electronic compensation) produces
stronger compensation than “Mode1”, depending
on the shooting conditions, it may not be able to
differentiate between movement of the subject and
movement of the unit as it performs compensation
(electronic) on movement detected in the video
signal. Therefore, erroneous compensation may
occur.
●
The image stabilization setting cannot be changed
while data is being written to the SD card.
Notes
Speed With Zoom POS.
“Off” or “On” is set here for the function used to adjust the
camera direction’s adjustment speed in conjunction with
the zoom magnification.
When “On” is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Factory settings: On
Focus Mode
“Auto” or “Manual” is set here for the focusing function.
Setting value:
Auto
The subjects are always brought into focus
automatically.
Manual
The focus is operated manually.
Factory settings: Auto
Focus ADJ With PTZ.
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations at the manual focus
setting.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
Factory settings: Off
