37
Manual shooting
(continued)
■
Manually adjusting the shutter
speed
The shutter speed can be set using two methods. One is
a method that specifies the time (where a time such as
1/250 sec. is designated), and the other is a method that
specifies the frequency (where synchro scan, 60.15 Hz, etc.
is designated).
When shooting a TV screen or PC monitor screen, the
horizontal noise generated when the screen is shot can
be minimized by adjusting the frequency to the screen
frequency using synchro scan.
●
The shutter speed cannot be adjusted manually when
HDR is set to “Low” or “High”. (page 51)
Note
When performing the operations
using the wireless remote control
Perform the adjustments on the Camera menu.
For further details, refer to the [Shutter Mode] and
[Step/Synchro] items on page 47 and page 48.
When performing the operations using the controller
●
When the following settings are made on the
AW-HE42, the shutter speed cannot be manually
adjusted (as the camera is locked in auto mode).
•
Shooting mode (Scene) is in “Full Auto”
(pages 31 to 32)
•
Contrast Mode is in “Auto”
(page 47)
Note
When using an AW‑RP50:
For details, refer to the operating instructions supplied with
the controller.
■
Manually adjusting the gain
There are two ways to adjust the gain. One way involves
using the buttons on the wireless remote control or controller;
the other way involves using the Camera menu or Web
setting.
The gain can be adjusted more precisely using the Camera
menu or Web setting.
For further details, refer to the [Gain] item on page 48 and
page 89.
●
When Shooting mode (Scene) on the AW-HE42 is set
to “Full Auto”, the gain cannot be manually adjusted
(as the camera is locked in auto mode).
For details, refer to “Selecting the shooting modes
(scene files)” (pages 31 to 32).
●
The gain cannot be adjusted manually when HDR is
set to “Low” or “High”. (page 51)
●
When adjusting the gain, the light quantity may change
suddenly (causing the image output to be subjected to
a shock).
Notes
When performing the operations
using the wireless remote control
1
Press the [OFF], [LOW] or [HI] button.
These buttons enable the gain increase to be selected in
three steps.
[OFF] is set to 0 dB, [LOW] is set to 9 dB, and [HI] is set
to 18 dB.
2
If necessary, press the [AUTO] button in order
to return the gain to the automatic adjustment
(AGC).
When performing the operations using the controller
When using an AW‑RP50:
Refer to the Operating Instructions of the controller.
In any case, the maximum gain of the automatic adjustment
(AGC) can be set by the camera menu or Web setting.
For further details, refer to the [AGC Max Gain] item on
page 48 and page 90.
