129
Web camera functions
(continued)
Camera control [Camera Control]
Zoom [Zoom]
This allows you to enlarge (zoom in) and reduce (zoom
out) images.
Setting range: 1 (wide end) to 2731 (optical telephoto
end)
Focus [Focus]
The lens focus can be adjusted manually.
Setting range: 1 (Near) to 2731 (Far)
●
This cannot be controlled when the focus mode is
“Auto”.
●
If this item is set to auto mode, the focus mode is set as
“Auto”. Also, if auto mode is canceled, the focus mode
is set as “Manual”.
Exposure [Exposure]
This allows you to set the shutter speed in the same way
as when “Step” is selected in the “Shutter Mode” item of
the camera menus and Web settings.
Setting value:
[When 59.94 Hz has
been set as the unit’s
frequency]
[When 50 Hz has
been set as the unit’s
frequency]
–13
1/10000
1/10000
–12
1/4000
1/4000
–11
1/2000
1/2000
–10
1/1000
1/1000
–9
1/500
1/500
–8
1/250
1/250
–7
1/100
1/120
–6
Off
Off
●
If this item is set to auto mode, the lens iris is set to
automatic adjustment and “Contrast Mode” of the
camera menus and Web settings is set to “Auto”.
If auto mode is canceled, the lens iris is set to manual
adjustment and “Contrast Mode” of the camera menus
and Web settings is set to “Manual”.
●
This cannot be controlled when the lens iris is set to
automatic adjustment.
●
If the shooting mode (scene) is set to “Full Auto”,
even if this setting is changed, the change will not be
reflected on the unit.
●
The settings of the auto mode of [Exposure] and
[Aperture (Iris)] are linked. The settings are in
accordance with the auto mode set last.
Aperture (Iris) [Aperture (Iris)]
The lens iris can be adjusted manually.
Setting range: 1 (minimum) to 2731 (open)
●
If this item is set to auto mode, the lens iris is set to
automatic adjustment and “Contrast Mode” of the
camera menus and Web settings is set to “Auto”.
If auto mode is canceled, the lens iris is set to manual
adjustment and “Contrast Mode” of the camera menus
and Web settings is set to “Manual”.
●
This cannot be controlled when the lens iris is set to
automatic adjustment.
●
The setting may be configured with a value that is ten
times larger depending on the communication software
used.
●
If the shooting mode (scene) is set to “Full Auto”,
even if this setting is changed, the change will not be
reflected on the unit.
●
The settings of the auto mode of [Exposure] and
[Aperture (Iris)] are linked. The settings are in
accordance with the auto mode set last.
Pan [Pan]
The camera can be panned left or right.
Setting range: –175 to +175 (1° increments)
●
The movement speed can be changed in “Preset
Speed Table”/“Preset Speed” of the camera menus and
Web settings.
●
After connecting via USB, do not change “Install
Position”. Operation will be in the opposite direction.
●
The default setting may be possible but panning of
the unit may not be able to be controlled depending
on the communication software.
Notes
Tilt [Tilt]
The camera can be tilted up or down.
Setting range: –30 to +90 (1° increments)
●
The movement speed can be changed in “Preset
Speed Table”/“Preset Speed” of the camera menus and
Web settings.
●
After connecting via USB, do not change “Install
Position”. Operation will be in the opposite direction.
Note
Roll [Roll]
This is not supported by this unit.
Low light compensation [Low Light Compensation]
This is not supported by this unit.
