Panasonic AU-EVA1E, Руководство по эксплуатации

Страница: 87 / 175

– 87 –
Chapter 4 Operation — Menu setting contents
[3G-SDI OUT]
Sets the format of the 3G SDI signal output from the <SDI OUT> terminal. Can be set when the 3G SDI signal is output.
[LEVEL-A] Selects the LEVEL-A method.
[LEVEL-B] Selects the LEVEL-B DL method.
(Factory setting: [LEVEL-B])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
[ON] Controls the recording operation of the external equipment.
[OFF] Does not control the recording operation of the external equipment.
(Factory setting: [OFF])
[INDICATOR DISP]
Displays/hides the item set in [SDI/HDMI INDICATOR] for the output from the <SDI OUT> terminal.
[ON] Displays the shutter speed, remaining battery level, etc. Content of display follows the setting in [SDI/HDMI INDICATOR].
[OFF] Hides all.
(Factory setting: [ON])
@ @ NOTE
t
This is not displayed in the output from the <SDI OUT> terminal when the menu is displayed in the LCD monitor.
[MARKER DISP]
Sets if the marker set in [SDI/HDMI MARKER] is displayed or not in the output from the <SDI OUT> terminal.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [OFF])
[MENU DISP]
Sets if the menu is displayed or not in the output from the <SDI OUT> terminal.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
@ @ NOTE
t
Even if [MENU DISP] is set to [OFF], the menu is displayed in the output from the <SDI OUT> terminal during the thumbnail screen.
[HDMI OUT]
[OUT FORMAT]
Selects the signal to be output from the <HDMI> terminal. The items that can be selected differ depending on the setting in the [SYSTEM SETTINGS]
menu
→ [SYSTEM MODE] → [FREQUENCY]/[MAIN PIXEL].
[4096x2160p] Outputs in 4096 × 2160p (4:2:2/10 bits).
[4096x2160p(420/8bit)] Outputs in 4096 × 2160p (4:2:0/8 bits).
[3840x2160p]
Outputs in 3840 × 2160p (4:2:2/10 bits).
[3840x2160p(420/8bit)] Outputs in 3840 × 2160p (4:2:0/8 bits).
[1920x1080p] Outputs in 1920 × 1080p.
[1920x1080i] Outputs in 1920 × 1080i.
[1280x720p]
Outputs in 1280 × 720p.
[720x480p] Outputs in 720 × 480p.
[720x576p] Outputs in 720 × 576p.
(Factory setting: [1920x1080p])
@ @
NOTE
t
For the combination that can be set, refer to “Format that can be output from the <HDMI> terminal”.
[HDMI TC OUT]
Sets if the time code information is output or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can
be set when [HDMI TC OUT] in [HDMI OUT] is enabled.
[ON] Controls the recording operation of the external equipment.