Panasonic AU-EVA1E, Руководство по эксплуатации

Страница: 69 / 175

– 69 –
Chapter 4 Operation — Menu setting contents
@ @ NOTE
t
When the [SYSTEM SETTINGS] menu → [SENSOR MODE] → [4/3 CROP&MIX 2.2K] is set
- The sensitivity will be lower than when [S35 5.7K] or [S35 MIX 2.8K] is set.
- [400 ISO] or [1250 ISO] can be set in the [SYSTEM SETTINGS] menu
→ [EI] → [NATIVE ISO].
[MAIN PIXEL]
Sets the main recorder’s number of recording pixels.
The items that can be set are as follows.
f
[4096x2160], [3840x2160], [2048x1080], [1920x1080], [1280x720]
(Factory setting: [4096x2160])
[MAIN CODEC]
Sets the recording codec of the main recorder.
f
MOV file
[420LongGOP 150M] 4:2:0 (8 bits) LongGOP 150 Mbps
[420LongGOP 100M] 4:2:0 (8 bits) LongGOP 100 Mbps
[420LongGOP 50M] 4:2:0 (8 bits) LongGOP 50 Mbps
[422LongGOP 150M] 4:2:2 (10 bits) LongGOP 150 Mbps
[422LongGOP 100M] 4:2:2 (10 bits) LongGOP 100 Mbps
[422LongGOP 50M] 4:2:2 (10 bits) LongGOP 50 Mbps
f
AVCHD file
[AVCHD PS] 4:2:0 (8 bits) LongGOP 25 Mbps
[AVCHD PH] 4:2:0 (8 bits) LongGOP 21 Mbps
[AVCHD HA] 4:2:0 (8 bits) LongGOP 17 Mbps
[AVCHD PM] 4:2:0 (8 bits) LongGOP 8 Mbps
(Factory setting: [422LongGOP 150M])
[COLOR SETTINGS]
[MAIN]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log] Sets to the gamma curve that can achieve gradation and wide latitude (exposure range). A grading process after recording is
required.
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Sets to setting to perform detailed image quality adjustment with the camera.
When [SCENE1] to [SCENE5] is selected, the menu setting for the same scene number is enabled in the [SCENE FILE
SETTINGS] menu.
(Factory setting: [V-Log])
[SDI OUT]
Sets the output image from the <SDI OUT> terminal.
f
When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.
[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
f
When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
(Factory setting: [V-Log])
[HDMI OUT]
Sets the output image from the <HDMI> terminal.
f
When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.
[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
f
When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
(Factory setting: [V-Log])
[LCD OUT]
Sets the output image from the <LCD> terminal.
f
When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.