Panasonic AU-EVA1E Скачать руководство пользователя страница 163

Страница: 163 / 175

– 163 –

Chapter 9 Notes — Warning system

Message

Screen display

Description

Behavior and cause

VIEW screen

HOME screen

[CANNOT PLAY.]

—

This is a clip that cannot be played back.

(When it cannot be played back due to difference of

the system frequency, etc.)

An error has occurred during playback, and the

playback has stopped.

A message is displayed.

Confirm if the system frequency of the clip is the

same as the system frequency of the camera.

Check the clip.

[CANNOT DELETE.]

—

This is a clip that cannot be deleted.

A message is displayed.

Match the device and content versions.

[CANNOT RECORD. THE

NUMBER OF CLIPS HAS

EXCEEDED THE MAXIMUM

LIMIT.]

—

The number of clips that can be recorded has

reached the maximum.

A message is displayed.

Replace the SD card or delete unnecessary clips.

[CARD ERROR. PLEASE

REFORMAT.]

—

Formatting of the SD card has failed.

A message is displayed.

Format it again.

[Repair failed.]

—

Repairing of the clip that an error has occurred

has failed due to disconnection of the power or

removing of the SD card during recording.

Restoring of the management information has

failed.

A message is displayed.

Check the SD card.

[UNABLE TO FORMAT.]

—

This is an SD card that cannot be formatted.

A message is displayed.

Check the SD card.

[CANNOT REPAIR CONTROL

INFORMATION DUE TO LOW

BATTERY POWER.]

—

Management information cannot be restored due to

insufficient remaining battery capacity.

A message is displayed.

Replace with a fully charged battery, or connect

the AC adaptor.

[CANNOT PROTECT.]

—

This is a clip that cannot be protected.

A message is displayed.

Match the device and content versions.

[THE CLIP IS PROTECTED.

PLEASE CANCEL

PROTECTION.]

—

The clip is protected so it cannot be deleted.

A message is displayed.

Cancel the protect on the clip.

[CANNOT DELETE UNTIL TOP

MENU IS DELETED. DELETE

TOP MENU? (RECORDED DATA

WILL NOT BE DELETED)]

—

It is trying to delete a clip on the SD card where the

top menu is created.

A message is displayed.

Delete the top menu.

[CANNOT RECORD UNTIL TOP

MENU IS DELETED. DELETE

TOP MENU? (RECORDED DATA

WILL NOT BE DELETED)]

—

The SD card with top menu created is inserted.

A message is displayed.

Delete the top menu.

[THUMBNAIL DATA ERROR IS

DETECTED.]

—

An error occurred in the thumbnail information of

the SD card.

A message is displayed.

Restoring of the management information is

performed automatically after this.

[CANNOT RECORD -

INCOMPATIBLE CONTROL

DATA.]

—

Version of the management information of the SD

card is not supported.

A message is displayed.

Match the device and content versions.

[CANNOT SET.]

—

This cannot be set.

A message is displayed.

Perform the setting after making it possible to set.

[THIS CLIP CANNOT BE

COPIED.]

—

The clip cannot be copied.

A message is displayed.

Copy the clips other than the corresponding clip.

[CONTROL DATA ERROR HAS

BEEN DETECTED. (SD CARD)]

—

An error occurred in the management information of

the SD card.

A message is displayed.

Restoring of the management information is

performed automatically after this.

[COPY FAILED. PLEASE CHECK

THE CARD.]

—

Copying of the clip has failed due to an error in the

SD card.

A message is displayed.

Check the SD card.

[COPY TERMINATION

IN PROGRESS DUE TO

INSUFFICIENT BATTERY

POWER. DO NOT SWITCH OFF.]

—

Remaining battery capacity became low while

copying the clip.

A message is displayed.

The copy is cancelled.

Replace with a fully charged battery, or connect

the AC adaptor.

[COPY TERMINATED DUE

TO INSUFFICIENT BATTERY

POWER.]

—

Copying of a clip is cancelled due to insufficient

remaining battery capacity.

A message is displayed.

Replace with a fully charged battery, or connect

the AC adaptor.

[CANNOT COPY - THE NUMBER

OF CLIPS HAS REACHED

MAXIMUM.]

—

The number of clips that can be copied has reached

the maximum.

A message is displayed.

Replace the SD card or delete unnecessary clips

in the copy destination.

[LOW BATTERY. PLEASE

CONNECT AC ADAPTOR OR

CHANGE BATTERY.]

—

It is trying to copy a clip or update the camera

firmware while the remaining battery capacity is

insufficient.

A message is displayed.

Replace with a fully charged battery, or connect

the AC adaptor.

[CANNOT PLAY THIS CLIP ON

THIS MODEL.]

—

This is a clip that cannot be played back with the

camera.

A message is displayed.

Playback on a device that can playback.

[Cannot copy: contains recordings

from other devices.]

—

The clip recorded in other device cannot be copied. A message is displayed.

Copy the clips other than the corresponding clip.

Содержание AU-EVA1E
















































































































































































Результаты поиска

Содержание AU-EVA1E

Отзывы:

Похожие инструкции для AU-EVA1E

Бренды по названию

Популярные бренды

Panasonic AU-EVA1E, Руководство по эксплуатации

Результаты поиска

Содержание AU-EVA1E

Отзывы:

Похожие инструкции для AU-EVA1E

Бренды по названию

Популярные бренды