Panasonic AU-EVA1E Скачать руководство пользователя страница 162

Страница: 162 / 175

– 162 –

Chapter 9 Notes — Warning system

Alert

Screen display

Description

Behavior and cause

VIEW screen

HOME screen

[SIMUL REC WARNING <SLOT

1>]/[SIMUL REC WARNING

<SLOT 2>]

An error has occurred in one of the SD card during

simultaneous recording.

A message is displayed for approximately five

seconds.

Recording to the other SD card will continue.

[SIMUL REC WARNING <SLOT

1>]/[SIMUL REC WARNING

<SLOT 2>]

It has tried to record exceeding the maximum

number of clips to one of the SD card during

simultaneous recording.

A message is displayed for approximately five

seconds.

Recording to the other SD card will continue.

When [DIAGNOSTICS] is selected in the INFO

screen, [SIMUL REC WARNING] [<OVER MAX

NUM. OF CLIPS>] is displayed in the warning

display area.

Replace the SD card or delete unnecessary clips.

[FAN STOPPED]

The fan has stopped.

A message is displayed.

The current operation will continue.

Stop the use immediately when the fan has

stopped, and consult the dealer.

If the fan has stopped, temperature of the camera

will rise. Therefore, do not use the camera for a

long period of time.

[CHECK CARD <SLOT 1>]/

[CHECK CARD <SLOT 2>]

The card cannot be recognized properly because a

recording medium which is not supported has been

inserted or there is dirt on the terminal of the card.

A message is displayed for approximately five

seconds.

Check the card that is inserted.

[FORMAT ERROR CARD <SLOT

1>]/[FORMAT ERROR CARD

<SLOT 2>]

The SD card with management information that is

out of specification is inserted.

(Include when the system frequency (59.94 Hz

system or 50 Hz system) for the AVCHD format

in the SD card is different from the setting in the

[SYSTEM SETTINGS] menu

→

[SYSTEM MODE]

→

[FREQUENCY])

A message is displayed for approximately five

seconds.

Insert an SD card that can be recorded.

The system frequency information for the AVCHD

format is confirmed at the time of formatting or at

the first recording.

[NOT SDXC CARD <SLOT 1>]/

[NOT SDXC CARD <SLOT 2>]

The SDHC memory card that cannot record the

MOV format data is inserted when [MAIN CODEC]

is set to MOV format.

A message is displayed for approximately five

seconds.

Insert an SDXC memory card.

[INCOMPATIBLE CARD <SLOT

1>]/[INCOMPATIBLE CARD

<SLOT 2>]

The SD card that may not be able to record due to

slow writing speed is inserted.

A message is displayed for approximately five

seconds.

The current operation will continue.

Use an SD card with sufficient writing speed.

[BACKUP BATT EMPTY]

Voltage lowering of the backup battery for internal

clock was detected when the power is set to <l>

(ON).

A message is displayed for approximately five

seconds.

The current operation will continue.

Set the date/time again after charging the built-in

battery.

Содержание AU-EVA1E
















































































































































































Результаты поиска

Содержание AU-EVA1E

Отзывы:

Похожие инструкции для AU-EVA1E

Бренды по названию

Популярные бренды

Panasonic AU-EVA1E, Руководство по эксплуатации

Результаты поиска

Содержание AU-EVA1E

Отзывы:

Похожие инструкции для AU-EVA1E

Бренды по названию

Популярные бренды