![Panasonic AJSDX900P - 24P DVCPRO 50 Скачать руководство пользователя страница 116](http://html1.mh-extra.com/html/panasonic/ajsdx900p-24p-dvcpro-50/ajsdx900p-24p-dvcpro-50_service-manual_3824122116.webp)
ELE-3
1-3. Preparations for Adjustment
1-3-1. Connection for EVR Adjustment
1. Remove the Cassette Cover ass’y and the Side Case
(L) ass’y.
2. Connect a communication cable (9-pin cross cable) as
shown bellow with the camera recorder and the PC
(Microsoft
®
Excel should be installed) power off. The
9-pin connector is located on the left side of the
camera recorder.
3. Set the rotary switch under the 9-pin connector to “2”
(for CAMERA adjustment) or “6” (for VTR adjustment).
4. Turn on the power of PC and the Camera-recorder.
1-3-2. Menu Setting
Procedures for Electrical Adjustment premised that the MENU settings were original (factory standard) setting.
Before adjustment, save the data of user settings for setup card and return the menus settings to the factory standard settings.
After complete the adjustment, load the data from the setup card.
For detail operation, refer to “Setup card operations” of Operating Instructions.
1-3-3. Service Menu Operation
Refer to Service Information (page INF-10) to open the Service Menu.
AJ-SDX900
9-pin cross
Cable
Serial (COM1)
Port
9-pin DSUB connector
(female)
Cue P. C. Board
Rotary Switch
VTR POWER P. C. Board
Microsoft
®
Excel
<Rotary switch setting>
0: Default (Operation mode)
1: Write Camera u-com
2: Communicate with Camera u-com
3: Write Servo u-com
4: Communicate with Servo u-com
5: Write VTR u-com
6: Communicate with VTR u-com
7: Write AUDIO/LCD u-com
8: Communicate with AUDIO/LCD u-com (1)
9: Communicate with AUDIO/LCD u-com (2)
A: Communicate with AUDIO/LCD u-com (3)
E: Write Camera FPGA
F: Write VTR FPGA
Содержание AJSDX900P - 24P DVCPRO 50
