Panasonic AJ-PG50 Скачать руководство пользователя

Страница: 97 / 136

Setup Menu: Menu List

Setu

p Menu

REC/PB > REC/PB FUNCTION

_ is the factory default setting.

3G-SDI LEVEL-A, 3G-SDI LEVEL-B DL, and 1.5G-SDI signals are written as “HD SDI” signals.

REC/PB

REC/PB FUNCTION

Item

Settings and brief function description

FREQ indications

RECORDING

Selects the recording method.

NORMAL

: Normal recording

LOOP

: Loop recording

AUTO REC

Selects whether recording and stopping are performed automatically in accordance with the
record and stop signals of the HD SDI

and HDMI input signals from a camera-recorder.

TYPE1

Recording and stopping is performed automatically in accordance with the record and stop
signals in the LTC information attached to HD SDI signals.

TYPE2:

Recording and stopping is performed automatically in accordance with the record and stop
signals in the SVITC information attached to HD SDI signals.

TYPE3:

Set this when using other manufacturer’s camera-recorders.

TYPE4:

Recording and stopping are performed automatically in accordance with the record and
stop signals added to HDMI.

OFF

Recording and stopping is not performed automatically.

Note:

• SD SDI signals are not supported.
• When this is set to other than OFF and the status becomes REC PAUSE, “AREC” is dis-

played in a superimposed screen.

• To start automatic recording, press the [REC]

and [PAUSE]

buttons simultane-

ously to switch the unit to the REC PAUSE state. This function does not work in any state
other than REC PAUSE. Also, the unit switches to the REC PAUSE state after an auto-
matic stop.

• For the details on devices for which compatibility has been verified, visit the website. (

➝

“

Website URL

” page 9)

• In normal recording mode, this setting is not available and an automatic stop is not per-

formed.

REPEAT PLAY

Sets whether to perform repeat playback during playback.

: Performs repeat playback. After the last clip is played, playback continues from the be-

ginning clip.

OFF

: Does not perform repeat playback. Stops playback at the end of the last clip.

Note:

• Repeat playback is not available during TEXT MEMO playback.
• If a P2 card is removed during repeat playback, playback is stopped when a clip that

no longer exists is reached.

• Even if you insert a P2 card during repeat playback, the additional clips will not be

played back until you stop repeat playback and then start repeat playback again.

SIMUL REC

Sets whether to record simultaneously to two P2 cards in two microP2 card slots.

: Performs simultaneous recording.

OFF

: Simultaneous recording is not performed.

CONT. REC

Sets whether to continue or stop recording when the input signal is disrupted.

: Continues recording

OFF

: Pauses recording.

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

Содержание AJ-PG50









































































































































Результаты поиска

Содержание AJ-PG50

Отзывы:

Похожие инструкции для AJ-PG50

Бренды по названию

Популярные бренды

Panasonic AJ-PG50, Руководство по эксплуатации

Результаты поиска

Содержание AJ-PG50

Отзывы:

Похожие инструкции для AJ-PG50

Бренды по названию

Популярные бренды