Panasonic AG-MSU10 Скачать руководство пользователя страница 47

Страница: 47 / 52

or long and

Troub

le-free Oper

ation

Message

Description

Measure

STORAGE
DEVICE
DISCONNECTED!

The unit has been disconnected from the
storage device.

Connect the storage device properly. If
the device still does not operate normally,
turn it off and turn it back on again.

SYSTEM
ERROR!

Last copy or format operation failed due to
a system control error.

Copy or format again.

TOO MANY
CLIPS!

Too many clips are selected.

Reduce the number of selected clips.

TOO MANY
FOLDERS!

There are too many folders on the storage
device.

The maximum number of folders is 100.
Use a new storage device or a formatted
storage device.

TOO MANY
PARTITIONS!

There are too many partitions on the stor-
age device.

Storage devices can handle up to 23
partitions. Use a new or formatted storage
device.

TOO MANY
TARGETS!

There are too many devices connected to
hubs.

Disconnect the device, turn off the unit
and turn it back on again.

TURN POWER
OFF!

Displayed when an error occurs in read-
ing and writing P2 card or storage device
data.

To continue operation, turn the power off
and then back on again.

UNKNOWN
CONTENTS
FORMAT!

An attempt was made to process an un-
known clip (clip version not supported by
this unit) or a bad clip.

Use only clips that are supported by the
unit.
Restore bad clips on the device that
recorded them or delete them.

UNKNOWN
DEVICE
CONNECTED!

An unsupported DVD drive or unsupport-
ed device is connected.

Disconnect the device, turn off the unit
and turn it back on again.

VERIFICATION
FAILED!

The contents of the copied data do not
match.

Copy the data again.

WRITE
PROTECTED!

The P2 card is write protected.

Insert write-enabled media.

Содержание AG-MSU10





















































Результаты поиска

Содержание AG-MSU10

Отзывы:

Похожие инструкции для AG-MSU10

Бренды по названию

Популярные бренды

Panasonic AG-MSU10, Руководство по эксплуатации

Результаты поиска

Содержание AG-MSU10

Отзывы:

Похожие инструкции для AG-MSU10

Бренды по названию

Популярные бренды