Panasonic AG-MSU10 Скачать руководство пользователя страница 43

Страница: 43 / 52

Interf

ace Bo

Control Reference Guide

AG-MSU10 connector

Connector for connecting the interface box to
the AG-MSU10 Mobile Storage Unit.

USB 2.0 connector (POWER connector)

Use the USB cable to connect this connector
to a USB 2.0 connector on a personal com-
puter to power the drive from the computer.

USB 2.0 connector (SIGNAL connector)

Use the USB cable to connect this connector
to a USB 2.0 connector on a personal com-
puter to power the drive from the computer
and to transfer data between devices.

WARNING LED

Lights to indicate that not enough power is
supplied.



For details, refer to “Checking Bus Power
Operation” (page 44).

POWER/ACCESS LED

Green: Power is supplied and the device is

ready to use.

Red: The host is accessing the device.



NOTE:

• POWER/ACCESS LED operation depends on

the installed SSD.

eSATA connector

Use the eSATA cable to connect this con-
nector to an eSATA connector on a personal
computer.



NOTE:

• The eSATA connector does not supply power.

Use the USB cable to supply power.

• Use double shielded cable for making connec-

tions to eSATA connectors.

Содержание AG-MSU10





















































Результаты поиска

Содержание AG-MSU10

Отзывы:

Похожие инструкции для AG-MSU10

Бренды по названию

Популярные бренды

Panasonic AG-MSU10, Руководство по эксплуатации

Результаты поиска

Содержание AG-MSU10

Отзывы:

Похожие инструкции для AG-MSU10

Бренды по названию

Популярные бренды