1
Control Reference Guide
Front and Rear View
Front view
1.
P2 card slot
This slot is designed for P2 cards.
Before inserting a P2 card, make sure that the
EJECT button is in. Hold the card level as you
insert it.
For details, refer to “Inserting a P2 card”
(page 20).
NOTE:
• Never insert anything in the slot except P2 cards.
2.
EJECT button
Press to eject P2 cards from the slot.
For details, refer to “Removing a P2 card”
(page 20).
3.
Interface box slot
This slot is designed for an interface box (AG-
MBX10G). Hold the box level as you slide it
into the slot.
For details, refer to “Inserting and Removing
Interface Boxes” (page 21).
NOTE:
• Never insert anything in the slot except an interface
box.
• Turn off the unit before inserting and removing
interface box.
4.
Front door lock lever
Slide the lever to open the front door and insert
or remove an interface box.
For details, refer to “Inserting and Removing
Interface Boxes” (page 21).
5.
Battery lock release button
Use this button to remove a supplied battery or
AC adapter.
For details, refer to “Disconnecting the Bat-
tery” (page 16).
6.
Power inlet
Insert the supplied battery or AC adapter here.
For details, refer to “Connecting and Dis-
connecting the Battery and the Power
Cable” (page 16).
1
2
1
2
3
4
a
ヰヱユワ
3
4
a
ヰヱユワ
Rear view
5
6
5
6
