Palax C750 Ergo, Инструкция по эксплуатации

Страница: 32 / 34

32
Palax C750 Translation 1-2018
11 Malfunctions and their remedy
Disturbance Cause Remedy
The crosscut saw-blade is heavy
on power and gets hot. 1. The blade is dull.
2. Too much resin in the blade. 1. Sharpen the saw-blade.
2. Clean the blade.
The saw-blade wobbles.
The crosscut blade starts to
wobble after a short period of
working. 1. Impurities between the flanges.
2. Blunt blade and problems with
stressing.
3. Faulty crosscut operation, the log has
rolled over
1. Clean the flanges and the
blade.
2. Sharpen and pre-stress the
blade
3. The blade is damaged, do
not use. Replace the blade.
The blade whines. 1. Too high speed, max. 2200 r.p.m.
2. Root-crack at the tooth 1. Decrease the speed
2. Do not use, replace the
blade.
The saw-blade rotates in the
wrong direction. 1. Wrong phase-order. 1. Use a cord with a phase
switch, and switch the
phase.
The electric motor does not start. 1. Emergency stop button has been
depressed.
2. Makes loud noise, but does not start.
1. Reset the emergency stop
2. The fuse has blown,
replace it.
The motor stops several times
and the thermo-relay trips. 1. The blade is dull.
2. Incorrect setting of the thermo-relay. 1. Sharpen the saw-blade.
2. Contact the manufacturer of
the electric motor.
Whining sound during the sawing
operation and the revolutions
drop. 1. V-belts are slack.
2. V-belts are worn
1. Tighten the belts.
2. Change the belts.
Blade does not come down
1. Protective cover for the chute is open 1. Close the cover
Protective cover for the chute
cannot be opened
1. Crosscut blade not in its upper
position
1. Press the multi-function
lever to its furthest position
on the right
Protective cover for the chute
cannot be opened
Palax Pro ja Pro+ 1. Crosscut blade not in its upper
position
1. Start the machine and lift the
blade using the joystick-
valve.
2. See point 4. 1-4
Splitting cannot be launched
manually Protective cover for the chute is open Close the cover