Palax C750 Ergo, Инструкция по эксплуатации

Страница: 14 / 34

14
Palax C750 Translation 1-2018
7. Hydraulic height adjustment of splitting wedge
8. Joystick valve for controlling the cutting, launching of splitting and infeed conveyor
operations
2.6 Table extension, Fig. 3
1. Disconnect the rubber strap A.
2. Pull open the locking lever B.
3. Swing the conveyor down and place the leg into the opening C in the frame. Re-
connect the rubber strap.
2.7
Bringing the conveyor into the work position, Figs. 4, 5, 6 and 7
Remove the locking pins A for the conveyor, Fig. 4 and 5.
Release the locks B, Figs. 4 and 5.
Unwind the winch wire a few rounds.
Pull out the conveyor and leave it supported by the winch rope.
Lower the conveyor to the ground using the winch.
4
B
A
5
A
B