Palax C750 Ergo, Инструкция по эксплуатации

Страница: 23 / 34

23
Palax C750 Translation 1-2018
WARNING! Crooked trees may be turned on the deck by the cutting force thus
twisting the blade so strongly that it breaks.
6.3 Cutting to equal length and feeding into the splitting chute
Cut off the undersized piece while there is still sufficiently material for one or two more
pieces of appropriate size left in the billet.
Use the scale A at the edge of the infeed deck as an aid, Fig. 15.
NOTE !
While cutting the last logs and, generally, always when processing
slender trees, increase the force on the clamp by pressing the handle B, Fig. 15.
This is a safe way to cut short and light-weight trees so that the tree cannot roll.
6.4
Feeding the last log for splitting
Using the conveyor, feed the last log onto the pusher without delay as the pusher is still
splitting the previous log.
As the pusher reverses, the log falls into the splitting chute and the splitting operation
can be launched manually immediately.
This notably speeds up processing of the firewood.
WARNING! Make sure that the tree always remains under the clamp during cutting.
The minimum length for the log is 25 cm.
7 Disturbances during crosscut operation and their remedy
7.1
Crooked trees
Cut crooked trees where they bend.
As you cut crooked trees, make sure that the log is leaning against the support roller.
7.2
Big trees
If the cutting sound is soft, the cutting speed and the saw-blade revolutions are correct.
15
A
B