10
GHI
Type infrared ceramic heaters
User’s Manual
Electrical connection
ATTENTION! Both the ignition control needs 230V/50Hz mains voltage.
Before connecting the appliance to the gas pipe line, please disconnect it from the power line and
close the gas valve front of the burner. The appliance must be connected to a grounded power supply
system! If the above instructions are not followed that can lead to death, heavy injuries or property
demages!
PLEASE CHECK THE EARTHING!
•
Work out the electrical network system regarding to the diagram was attached to the appliance.
The connection diagram could change anytime: so we recommend to use the diagram which was
attached to the appliance.
ELECTRICAL CONNECTING SPECIFICATIONS:
• The electrical supply: 230V / 50Hz - grounded
•
Approximately 20W electrical performance per appliance
•
The appliance must be operated under dry circumstances.
• At electrical installation of appliance the relevant MSZ 2364 standard must be considered.
• The mains connection can be executed by grounded plug or fixed
properly installed phase-null wires
.
•
The appliance is phase-sensitive for this reason the connection always be careful
The solenoid type VK4125C 2005 S4965R2027-type GHI-mounted automatic infrared radiant
electric connection device (manufactured by HONEYWELL)
6.picture: Assemblage of the gas magnetic valve
Independently from one another
Assembling together
Regulatory options
CAUTION
!
DANGER
!
CAUTION
!
ELECTRIC
SUPPLY
ATTENTION
!
COMPULSORY:
EARTHING
