PACOM RDRH-EL104, Руководство пользователя

Страница: 49 / 82

4-Channel Digital Video Recorder
41
Press the button to display the menu screen. The menu on the setup screen has the following
functions:
You can control excessive event logging and remote notification of motions detected after the
motion dwell time by adjusting the motion ignoring dwell intervals. Highlight the box beside
Motion Ignoring Interval
and press the button. A list of intervals ranging from 1 to 10 seconds
or Never appears. The DVR will not log and notify motion events occurred during the preset
interval range.
NOTE: The record action for motion events will not be affected by the Motion Ignoring
function.
Highlighting Daytime Setup and pressing the button allow you to set up the Daytime range.
Highlight the Actions tab, and the Motion Detection Actions setup screen appears.
The Motion Detection Zone screen is laid over the video
for the selected camera. You can set up motion detection
zones by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a
time in groups of four individual block groups. A
block group is positioned within the image area using
the Up and Down arrow buttons, and individual blocks
within the block groups are selected or cleared using
the camera buttons.
Select Activates highlighted blocks to detect motion.
Clear Deactivates highlighted blocks so that they will not detect motion.
Reverse
Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All Activates all blocks to detect motion.
Clear All Deactivates all blocks so that they will not detect motion.
Reverse All
Activates inactive blocks and deactivates active blocks.
OK Accepts changes and closes Zone setup.
Cancel Exits Zone setup without saving changes.
Highlight the box beside Daytime and press the button. Use
the Up and Down arrow buttons to set the Daytime range. The
DVR will consider the remaining time range as the Nighttime.
Figure 44 Motion Detection Actions setup screen.
The DVR can be set to react to motion
detection differently for each camera. Each
camera can be associated with another camera,
trigger an Alarm-Out connector, sound the
DVR’s internal buzzer, notify a number of
different devices, and/or move PTZ cameras
to preset positions.
NOTE: You can associate multiple cameras
with a camera that detects motion.