12
13
Setting up and connecting power
4
Installation location
4.1
The PACOJET 2 machine should only be installed in a dry location with ade-
quate ventilation on a stable, flat surface measuring at least 50 cm × 50 cm.
The PACOJET 2 machine must sit firmly and level, with its placement position
ensuring the free-flow of cooling air for the rear intake vent. Likewise, ensure
there is ample clearance underneath the machine for the free-flow of exhaust
air without any obstructions.
IMPORTANT!
Î
Never use the machine:
in direct proximity of a heat source (i.e. grill)
•
in direct proximity of a source from which steam or greasy vapours are
•
emitted (i.e. fryer)
in direct proximity of an exhaust from which warm or hot air is emitted (i.e.
•
combi steaming oven)
in direct proximity of a water connection or in the area of equipment that is
•
cleaned using a water hose or high-pressure sprayer/steamer
on surfaces prone to heavy vibration
•
Non-compliance with the above instructions may result in a malfunction or
damage to the machine.
one stainless steel spatula
Inspect to determine whether any items are missing or defective. Should
this be the case, please contact the place of business where the unit was
purchased and report your claim immediately. Claims for missing/defective
goods must be submitted within the legally designated time limit to be con-
sidered valid.
Keep all original packaging materials following PACOJET 2 installation to pro-
tect the machine from damage should it need be transported at a later date.
