6
7
The machine emits sound during processing. Emission
n)
data can be found in chapter 9.
Only the use of original Pacojet spare parts is permit-
o)
ted. The use of other accessories not authorised by
Pacojet is not permitted.
Read the instruction manual for PACOJET 2 and famil-
p)
iarise yourself with the machine and its handling, op-
eration, use and cleaning.
The cleaning of PACOJET 2 and its accessories must
q)
be done in accordance with the instruction manual
(Chapter 7).
Handling food requires strict hygienic procedures that
r)
comply with legal food standards.
Only the processing of foods is permitted. Processing
s)
anything other than foods is forbidden (Chapter 6).
Never use PACOJET 2 to process ingredients that pro-
t)
duce gases during processing that could increase pres-
sure levels uncontrollably inside a pacotizing beaker,
i.e. pure liquid nitrogen (N) or carbon dioxide (CO
2
)
bound in an ingredient high in carbonation (Chapter
6). Accordingly, do not add any such products during
processing.
Never start the machine without a pacotizing beaker
u)
being inserted in the protective outer beaker (see
Chapter 6).
The Pacojet Coupe Set (available optionally) includes
g)
two extremely sharp cutting blade attachments. Due
to the risk of injury, all handling of them must be done
solely using the cutter tongs. Do not touch the cutting
edge of the blades! (Section 6.3)
Install the PACOJET 2 on a level surface away from
h)
water splash, sinks and any equipment producing
steam. Ensure that there is adequate space. The main
power switch is located on the right side of the machine
and must be accessible without obstruction at all times.
(Section 4.1)
In order to operate the machine safely, make sure that
i)
there is adequate moving space around the machine.
Before connecting the machine into a power socket,
j)
ensure that the voltage and power frequency of the
electrical source conform to that indicated on the
machine data plate. These must correspond exactly.
(Section 4.2)
For additional protection, it is recommended that a
k)
20 mA ground fault circuit protector be installed. Con-
sult with your electrician about installation.
Do not operate the machine if the power cord is dam-
l)
aged. Contact your Pacojet service provider. (Section
9.3)
The power cord can only be replaced by a service pro-
m)
vider explicitly authorised by Pacojet.