CONNECTING THE EQUIPMENT (cont.)
A
&
V
RF Cable TV
HDMI or [DVI & Audio]
Home
Theater
HDTV
Cable TV
RF
Cable Wiring Diagram D
Digital Audio
Audio & Video
Stereo Audio
VHS
Recorder
TDC779X
set-top
About Setup D: Adding a home theater receiver to Setup C
All of the points mentioned in Setup C apply.
To enhance the sound, connect a home theater receiver.
There is a choice of two S/PDIF outputs: (i) electrical (labeled DIGITAL AUDIO OUT, which is shown connected by cable 8 in the
diagram, opposite) and (ii) optical (labeled OPTICAL AUDIO OUT).
When you add a home theater receiver, the set-top’s audio connection to the TV (via HDMI) is not needed, so you may wish to mute
(turn off) the audio on the TV.
Instead of the VCR’s baseband audio output going to the TV, it connects via cables 7 to the home theater receiver.
When the set-top is turned off, there are the following audio loopthroughs, which allow you to connect additional equipment to the
home theater receiver:
DIGITAL AUDIO IN
loops through to
DIGITAL AUDIO OUT
OPTICAL AUDIO IN
loops through to
OPTICAL AUDIO OUT
AUDIO IN
loops through to
PRIMARY AUDIO OUT
AUDIO IN
loops through to
SECONDARY AUDIO OUT
•
•
•
•
•