OPERATING THE SET-TOP (cont.)
Using the remote control
The cable TV service-provider determines the digital channels, services and screen information that you see on the TV when you use the
set-top and its remote control.
Consult the information supplied by the cable service-provider for details on how to make the most of the digital cable services. Also read
the operating instructions that are supplied with the remote control.
Activating baseband loopthrough for a DVD or similar equipment
To activate baseband loopthrough, turn off the set-top by pressing the
POWER
button on the remote (making sure the remote control
is set to control the set-top) or by pressing the
power
button on the front panel. When the set-top is turned off, the light next to the
power button is red.
If you activate baseband loopthrough, the following occur:
COMPONENT VIDEO IN
loops through to COMPONENT VIDEO OUT
VIDEO IN
loops through to VIDEO OUT
AUDIO IN
loops through to PRIMARY AUDIO OUT and
SECONDARY AUDIO OUT
DIGITAL AUDIO IN
loops through to DIGITAL AUDIO OUT
OPTICAL AUDIO IN
loops through to OPTICAL AUDIO OUT
Lightning storms
Disconnect the set-top’s power cord during lightning storms. A lightning storm may affect the set-top, if it is on during the storm. It may
appear that it has stopped working, but you can easily restore its operation as follows.
Unplug the set-top’s power cord at the wall AC outlet. Then plug this power cord in again at the wall AC outlet (and, if there is a switch by
this outlet, switch it to its ON position).
