7
Kabel Digital
.
CONNECTING YOUR
SET-TOP BOX
Before starting, choose a suitable position for
your set-top box, observing the ventilation
requirements set out on page 4.
NOTE: You do not need to connect your TV aerial
to your TV, because the national terrestrial
channels are included in the cable service.
Provided you connect up as shown, you can still
tune your TV to these channels. Your set-top box
must be plugged in, but does not need to be
switched on.
WARNING: Before you connect or disconnect your
set-top box to/from any other equipment, make
sure you disconnect all the equipment from the
mains supply.
CONNECTION METHOD 1:
Connecting to a TV
01.
Connect the lead from your cable service
provider to the connector marked
HF-
EINGANG
on your set-top box.
02.
Connect the supplied RF lead between the
HF-AUSGANG
socket on your set-top box
and the AERIAL IN socket on your TV.
03.
Connect the supplied SCART lead between
the
TV
SCART socket on your set-top box
and the SCART socket on your TV.
04.
Plug the 2-way connector on the supplied
mains lead into the mains socket (marked
230V
50-60Hz)
on your set-top box.
05.
When all the connections are properly
made, connect all the equipment to the
mains supply.
TV
VCR/AUX
AUDIO
L
R
HF-AUSGANG
HF-EINGANG
DIGITAL-AUDIO
AUSGANG
ZIEHEN SIE IMMER DEN NETZSTECKER,
BEVOR SIE DEN DECKEL ENTFERNEN
ES BEFINDEN SICH KEINE WARTUNGSFÄHIGEN TEILE DARIN
230V 50-60Hz
TV
Set-top box
SCART lead
RF lead
Cable
input
Mains lead
Mains lead
CONNECTING UP
prem-user-eng-Iss3b.fm Page 7 Wednesday, July 20, 2005 12:20 PM