![Pace Technologies NANO 1000S Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/pace-technologies/nano-1000s/nano-1000s_manual_745783018.webp)
NANO 1000S Polisher
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com W eb: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
13
1. To select a wheel rotation direction, press the Wheel Direction button (as seen
above) on the control panel.
2. Manually adjust speed by using the Directional Buttons:
a. Moves the digit selector to the desired spot.
b. Adjusts the number up and down.
4.2.2 Programming the rpm and Time Presets
1. Press and hold the button you would like to set until the screen changes to the
number display.
2. Using the Directional Buttons, change the number to your desired preset.
3. Press the desired program button again to save the preset.
4. Now press the programed button to set the machine to the programmed value.
4.3 Grinding and Polishing by Hand
1. Install working wheel and attach grinding surface / polishing cloths.
2. Switch on the machine in the back and set the direction, speed, and time
(if required).
3. Position flexible water spout over working wheel. During sample preparation
adjust water flow by turning water control knob as needed.
4. Press RUN / STOP to start and stop the machine in manual mode.
Note:
Initial operation of water valve may contain air in the lines. Turn water on slowly
to purge air from the system.
4.2.1 Manual Direction and Speed Controller