5
•
Use a slightly moistened paper sheet or cloth for cleaning. Avoid using liquid or sprayed
detergent.
•
When replacing components, insert them as gently as possible while assuring full engagement.
Vibration and shock can easily damage hard drives.
•
Only qualified service personnel should open the enclosure.
•
Contact service personnel if any of the following situations occurs:
-
The power cord or plug is damaged.
-
The enclosure has been exposed to moisture.
-
The system has not been working properly.
-
The enclosure was dropped against a hard surface.
-
The enclosure shows obvious signs of breakage.
•
To move the enclosure, more than one person might be necessary due to its weight.
Drives should be removed from the enclosure beforehand.
Important Notice
The use of PAC Storage certified components is strongly recommended to ensure compatibility, quality,
and normal operation with your PAC Storage products. Contact your distributor for a list of PAC Storage
certified components (e.g. SFP, SFP+, HBA card, iSCSI cable, FC cable, memory module, etc.).
ESD Precautions
•
Handle the modules by their retention screws, ejector levers, or the module’s metal
frame/faceplate only. Avoid touching the PCB boards or connector pins.
•
Use a grounded wrist strap and an anti-static work pad to discharge static electricity when
installing or operating the enclosure.
•
Avoid dust, debris, carpets, plastic, vinyl, and Styrofoam in your work area.
•
Do not remove any module or component from its anti-static bag before installation takes
place.
•
Drives must not be stacked on top of each other without their protective drive trays. Even when
drives are fixed in the drive trays, contacting the exposed PCB or rear-side interface may damage
the drives.
About this Manual
The manual introduces hardware components of the PAC Storage PS 2000 Series storage system and
expansion enclosures. It also describes how to install, monitor, and maintain them.
For non-serviceable components, contact our support sites.
Firmware operation: Consult the Firmware User Manual on the CD-ROM.
PAC Management Software: Consult the PAC Management Software User Manual on the CD-
ROM.
Revision history
Version
Date
Description
1.0
August 2018
Initial release
