79
Replacing the Hard Drive
WARNING!
•
Ensure to have the replacement ready before replacing the hard drive. DO NOT leave the
drive tray open for long periods to prevent disruption of internal airflow.
•
Handle the hard drives with extreme care. Hold them by the edges and avoid touching
the circuits and interface connectors.
To replace the hard drive:
1.
Identify the faulty hard drive using the PAC Management Software.
NOTE:
See section
Hard Drive Designation
for the order of the drive bays.
2.
When the faulty hard drive is located, push the release button to eject the drive tray, wait
for 30 seconds for the drive to spin down, then pull the tray out using the spring handle.
3.
Remove the retention screws from the drive tray to dislodge the hard drive.
4.
Orient the replacement hard drive to the tray with the interface connectors facing the
open side of the tray and the label is facing up. Secure the hard drive with the screws
you removed in step 3.
