37
3.
Insert the SFP module into one of the system host ports. The module will snap
into place.
NOTE:
The drawing of the controller is for reference only. Look for the actual system host ports in
your PS 2000 system.
4.
Remove the two protective caps from the LC-to-LC type cable. Save the
protective caps for future use.
5.
Insert the LC-to-LC cable to the SFP transceiver module already connected to
the system. You can hear a clicking sound, securing the cable in place.
NOTE:
The drawing of the controller is for reference only. Look for the actual system host ports in
your PS 2000 system.
6.
Remove the protective caps on the other end of the cable, then connect to an
SFP transceiver module on a fibre channel switch port or a fibre channel host
bus adapter (HBA) port.
LC-to-LC cable
Protective caps
