31
4. Insert the assembled hard drive and tray into the enclosure with the spring handle open.
WARNING!
Ensure that your system has all of the drive bays occupied with the drive trays even if
there are no hard drives installed. Without the drive trays, the ventilation is compromised and may
cause overheating.
5. Close the spring handle when the drive is fully inserted into the bay.
Installing the Host Boards
NOTES:
•
A downtime may occur when upgrading the controller/host board.
•
To add or replace a host board, the firmware automatically restores the default factory
settings of your system.
To install a host board, follow the steps below:
1. Shut your system down.
2. On the controller that you want to add a host board, unfasten the retention screws
located under the ejection levers.
