27
Assembling the Slide Rail Kit
To assemble the slide rail kit:
1. Determine the position where the system will be installed to the front and rear rack
posts, then insert the cage nuts into the designated holes on the front rack posts.
2. Loosen the four screws on the slide rails then adjust its length. After the length
adjustment, secure the slide rails to the front and rear posts with the truss head screws.
3. Attach the inner glides to both sides of the enclosure using the flathead screws no. 6-32.
NOTE:
The drawing of the enclosure is for reference only, but the step is the same.
4. With the assistance of another person, lift and insert the enclosure onto the slide rail.
Ensure that the inner glides on both sides of the enclosure meet the inner glide rail.
No.
6-
