Owandy Radiology i-max touch, Руководство по обслуживанию

Страница: 266 / 267

11. APPENDIX
11.1. Appendix A: Setup parameters table
The following table lists those adjustment parameters stored in the unit during
factory testing and that must be re-entered into the non-volatile memory in
case of replacement of the main CPU board (A5). This is due to the fact that
the new CPU board, provided as a spare part, has been factory tested from the
functional point of view, but contains only default parameters which are not
related to the unit where it will be installed.
Entering of the listed parameters can be performed through the service
programs (passwords).
NOTE:
The information listed in the table is the technical parameters set during
factory testing. Preferences set by the user (e.g. exposure parameters different
than the default ones) are not listed.
The table also has columns with blank cells. These cells must be filled in
when, during installation or during the life of the unit; any of the listed
parameters have been modified (e.g. after replacing a motor or a positioning
sensor).
