Owandy Radiology i-max touch, Руководство по обслуживанию

Страница: 135 / 267

SERVICE MANUAL
Troubleshooting
I-Max Touch 8-29
8.3.3.3. Disable X-ray
This selection is used to enable or disable the emission; this operation is
useful for exhibitions, leaving the unit functioning as in the normal
mode.
NOTE:
If the emission is OFF, a warning message will be displayed just after the
initial message one and before the TEST message. The display is cleared
by pressing the Patient Centering (>0<) key.
8.3.3.4. Manage pano option
This menu allows enabling the additional Panoramic examination
projections; those are enabled only if the protection key match the
hardware value.
In case this option has been already enabled, the display will visualize
the already stored value, otherwise it will show the default value. In both
cases, it is possible to change and set the value according to the
protection key received.
F F F F F F F F F F F F F F F F
V A L U E [ 0 ] = F F
Where VALUE[x] is the value assigned to the couple of digits, with "x"
ranging from 0 to 7, and "FF" is the hexadecimal value assigned to the
specific couple. Using the standard buttons to move into the selected
field, set its value equal to the one received for the appropriate position.
Values are displayed and changed using a couple of digits, with a
variation of one unit for each pressure of the parameter
increase/decrease keys; the auto repeat function for fast changes is
enabled.
