Owandy Radiology i-max touch, Руководство по обслуживанию

Страница: 136 / 267

SERVICE MANUAL
Troubleshooting
I-Max Touch 8-30
8.3.3.5. Management Implant option.
This menu allows to enable the Implant examination, that is enabled only
if the protection key match the hardware value.
In case this option has been already enabled, the display will visualize
the already stored value, otherwise it will show the default value. In both
cases, it is possible to change and set the value according to the
protection key received.
F F F F F F F F F F F F F F F F
V
A L U E [ 0 ] = F F
The values of the first line have to be reset according to the values
reported on the document you received with the kit. Such values,
expressed in hexadecimal references, are changed in two-digits steps.
1. Using the increase/decrease keys , set the first couple of
digits (VALUE[0]) as reported on the relevant value present in the
document you received with the kit.
2. By means of the keys Arrow right/Arrow left set
VALUE

1

and using the increase/decrease keys , set the
second couple of digits equal to the relevant value.
3. Repeat point 2 until VALUE

7

.