OutBack Power SmartRE 2500, Руководство по установке

Страница: 42 / 70

Installation
40
900-0033-01-00 Rev A
De-energize/Shutdown
WARNING: Lethal Voltage
Review the system configuration to identify all possible sources of energy.
Ensure ALL sources of power are disconnected before performing any
installation or maintenance on this equipment. Confirm that the terminals are
de-energized using a validated voltmeter (rated for a minimum 1000 Vac and
1000 Vdc) to verify the de-energized condition.
WARNING: Burn Hazard
Internal parts can become hot during operation. Do not remove the cover
during operation or touch any internal parts. Be sure to allow them sufficient
time to cool down before attempting to perform any maintenance.
1. Open the PV Breakers.
1
2. Open the AC Breakers.
2
3. Open the DC Breaker for the Battery.
3
4. Using a digital volt-meter, verify 0 Vdc on the Battery terminals
(i.e., Place voltmeter leads on
4+
and
4–
in Figure 29).
5. Using a digital volt-meter, verify 0 Vdc on the PV terminal
(i.e., Place voltmeter leads on and in Figure 29).
6. Using a digital volt-meter, verify 0 Vac on the AC Breakers
(i.e., Place voltmeter leads on
6+
and
6–
in Figure 29).
Figure 29 Shutdown Procedures
5–
3 1 2
6+
6– 4–
5+
4+