OutBack Power SmartRE 2500, Руководство по установке

Страница: 17 / 70

Planning
900-0033-01-00 Rev A
15
Preparation
Tools Required
The following tools may be required for installing this equipment.
¾
Wire cutters/strippers
¾
Drill and drill-bits
¾
Torque wrenches
¾
Ratchet drives
¾
Assorted insulated screw-drivers
¾
Digital Voltmeter
Materials Required
The following materials may be required for installing this equipment.
¾
Conductors for wiring
¾
Conduits, bushings (Rain-proof connectors must be used for 3R Rating if installed outdoors)
¾
Anchor Bolts (x4) or Dry-wall (x6) screws for mounting.
¾
Plywood for additional wall support or concrete to make a platform to sit the unit on. (Optional)
Accessories
The following accessories are available.
¾
MATE2 System Controller and Display (included)
¾
Remote Temperature Sensor (included)
¾
Front Cover, Top Cap and Front Cover Locking Bracket
(Required for 3R Rating. May be purchased separately)
The following accessories are available for purchase.
¾
Battery Enclosure Paralleling Kits
¾
Wall-Mounting Bracket for 24” wall studs
¾
Battery Installation Kits
Location
¾
SmartRE is rated for indoor and outdoor installations.
The Front Cover, Top Cap and Locking Bracket are required
for outdoor installations.
¾
SmartRE enclosures can be arranged horizontally or
vertically depending on the installation space that
is available. The SmartRE can be wall-mounted,
platform mounted, or stacked.
¾
Only two modules can be stacked in a vertical
arrangement. Sets of stacked modules can sit side-by-
side. Ensure the location can support all the weight of
multiple systems.
Battery enclosures must be floor/pad
mounted only.
¾
In areas where seismic activity is a concern, consult
local code for seismic safety requirements. Horizontal
arrangements may be preferred using the wall-mounting
brackets for stability.
Figure
4
Flexibility of Installation
Vertical
Arrangements
Horizontal Arrangements