OutBack Power SmartRE 2500, Руководство по установке

Страница: 40 / 70

Installation
38
900-0033-01-00 Rev A
Setting System Parameters – The Advanced Menu
Battery Amp-Hours and Return Amps are the only two system parameters that may need to be
changed depending on the installation. This is done in the Advanced Menu.
¾
Battery Amp-Hours refers to the total amp-hour capacity of the battery bank (not just amp-hour rating of
the individual batteries within the battery bank). The SmartRE comes configured optimized for a
100 amp-hour, 48 Vdc AGM battery bank.
¾
Return Amps is the low limit to which an absorption current must decrease, while still maintaining the
absorption voltage, before the battery is judged to be full. Use the battery manufacturer’s specifications or
2% of the battery bank capacity.
IMPORTANT:
¾
Making changes to the Advanced Settings could adversely affect current
system performance. Only make changes to the factory default settings if
you are qualified to do so.
¾
To reset the factory-default settings, see the SmartRE Operator’s Manual.
Figure 27 Accessing the Advanced Menus
IMPORTANT :
A password will be
required to access the
Advanced Menu system.
This password cannot be
changed.
The system password is
141
1
2
3
4
5
Default Settings :
Battery Amp-Hours
= 100
Return Amps
=
2