Page 47
Page 46
900-0125-
12
-
02 Rev A
©2017 OutBack Power Technologies. All Rights Reserved.
Profile Wizard
Notes
W-5.
Using Existing Profiles
This section shows the process of saving the profile and creating names for each file. The screen
progression shown here is the same whether
A
is selected in the
New Profile
,
Existing Profile
, or
Restore Profile
menus.
To save a profile to an SD card:
If other profiles have been saved on the SD card, a list will be displayed (
L
).
Choose Option 1 or 2 below.
NOTE
: If the SD card is empty, pressing <
Save
> will automatically default
to Option 2 below.
1. Select a name on the list with the control wheel. Press the <
Save
> soft
key (
N
) to save the new settings over the selected profile.
Saving to SD
Card
will be displayed. Proceed to 3.
OR
2. Press the <
New
> soft key (
M
) to create a new profile name.
(8 characters maximum)
●
Use the control wheel to scroll through the available characters.
●
Use <
> or <
> to move to the desired character location.
●
Use <
Delete
> to erase characters when highlighted.
Press <
Save
> to save the new profile name.
Saving to SD Card
will be displayed.
In either case:
3.
Wait for the confirmation screen to appear. After the screen appears,
press <
Continue
> to return to the
Setup Complete
screen
J
.
N
P
L
M
M
O
J
J
N
