Otto Bock 480S26 20000 K, Инструкция по эксплуатации, Страница: 29 / 40

Pickbar
Steel component on the Rugby Defense version (see fig. 51). The wear and tear part "bumper" can be unscrewed
and replaced when needed (see fig. 52, item 1).
51 52
Bumper
Steel component on the Rugby Offense version (see fig. 53). The wear and tear part "bumper" can be unscrewed
and replaced when needed (see fig. 53, item 1).
53
9.12 Additional options
The product may be equipped with additional options.
The options are firmly mounted to the product by qualified personnel or the manufacturer and are pre-adjusted by
qualified personnel at delivery.
9.13 Disassembly and transport
The wheelchair must be prepared for transport in a passenger vehicle.
1) Remove the drive wheels (see page 24).
2) Place the disassembled wheelchair and components safely in the vehicle.
3) Securely reattach the drive wheels during reassembly.
9.14 Use in vehicles for transporting persons with reduced mobility
WARNING
Improper use in vehicles for transporting persons with reduced mobility
Risk of serious injury when using the product as a seat
► The product has
not
been approved by the manufacturer for use as a seat in vehicles for transporting persons
with reduced mobility.
►
In vehicles for transporting persons with reduced mobility, only use the seats installed in the vehicle with the
corresponding personal restraint systems.
► Information on the current status of our measures is available from the qualified personnel.
29 Invader 480S26=20000_K
Use