Otto Bock 480S26 20000 K, Инструкция по эксплуатации

Страница: 24 / 40

9.6.1 Removing and mounting the drive wheels
CAUTION
Incorrect removal/attachment of the wheels
Tipping, falling due to incorrect installation
► The user is not permitted to sit in the wheelchair during wheel replacement.
► For changing wheels, set the wheelchair onto a solid surface.
► To change the wheels, secure the wheelchair against tipping over or rolling away.
►
If the drive wheel does not lock securely or has too much sideways play, contact the qualified personnel
promptly.
Drive wheels with quick-release axle
1) Release the wheel lock.
2) Grip the area between the spokes near the hub with your fingers.
3) Use your thumb to press in the push-button on the quick-release axle.
4) Remove or mount the drive wheel.
After mounting:
The drive wheels must not be removable after releasing the push-button on the quick-release
axle.
33 34
Drive wheels with quick-release mechanism
The Ø 25 mm wheel axle is permanently attached to the wheel hub.
1) Release the clamping lever (see fig. 35).
2) Pull off/push on the drive wheel.
3) Firmly close the clamping lever to the stop (see fig. 36).
35 36
24
Use
Invader 480S26=20000_K