Otto Bock 480S26 20000 K, Инструкция по эксплуатации

Страница: 21 / 40

A single-panel foot plate (see fig. 22; see fig. 23), a single-panel foot plate with upturned edges (see fig. 24) or an
open tube foot support (not illustrated) may be installed depending on the order.
Aluminium or carbon foot boxes can be ordered as well (not illustrated). The upturned edge of a foot box provides
added support for the feet.
An anti-slip material may also be glued to the foot plates (see fig. 24).
22 23
24 25
9.4 Seat and back upholstery
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
► The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
►
Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
►
Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair. It was chosen by
qualified personnel according to the needs of the user.
9.4.1 Removing and fastening the seat cushion
The seat cushion can be removed for cleaning.
1) Remove the seat cushion from the seat pad (see fig. 26).
2)
After cleaning (see page 30):
Place the seat cushion on the seat pad. The seat cushion is secured against
sliding by being pressed on to the hook-and-loop fastener.
21 Invader 480S26=20000_K
Use