26
9.4.2 Removing and fastening the back support pad
The backrest pad can be removed for cleaning.
1) Remove the seat cushion from the seat pad.
2) Pull the lower end of the backrest pad off the hook-and-loop fastener on the seat pad (see fig. 27).
3) Pull the back padding up and off (see fig. 28).
4)
After cleaning (see page 30):
Put the back padding back onto the back upholstery. Position the seam of the
backrest padding exactly over the upper upholstery strap (see fig. 29, item 1).
5) Pull the backrest padding down and attach it to the hook-and-loop fastener on the back upholstery.
6) Attach the lower end of the backrest padding to the hook-and-loop fastener on the seat pad (see fig. 30).
INFORMATION: This prevents sliding and protects against draughts.
7) Fasten the seat cushion to the hook-and-loop fastener on the seat pad.
27
28
29
30
22
Use
Invader 480S26=20000_K
Содержание 480S26 20000 K
Страница 1: ...Instructions for use 3 Invader 480S26 20000_K...
Страница 2: ...2 Invader 480S26 20000_K...
Страница 37: ...37 Invader 480S26 20000_K...
Страница 38: ...Invader 480S26 20000_K 38...
