Otto Bock 480S26 20000 K, Инструкция по эксплуатации

Страница: 32 / 40

When Inspection task Comments
If the tyre tread is worn or the tyre is dam­
aged, contact the qualified personnel. Before each use
Check the back support tubes and
frame tubes for damage In case of deformation or the formation of
cracks in the area of the welding seams,
contact the qualified personnel promptly.
Risk of accident!
Oil components (with a few drops of
oil):
all axles on the wheelchair
Remove old oil residue from components
before oiling.
Make sure that oil does not pollute the
environment.
Check screw connections for firm fit
Every 8 weeks
(depending on strain)
Check the legibility of all labels on
the product
Every 6 months
(depending on frequency
of use)
Check cleanliness and overall condi­
tion Observe the information in the section
“Care”.
10.1.2 Maintenance tasks
To ensure smooth operation at all times, users or attendants with some technical skills can maintain some parts of
the product:
•
Screw connections must be periodically checked for tightness, especially during the initial period of use or
after adjustments have been made to the wheelchair. If a screw connection loosens repeatedly, contact the
qualified personnel promptly.
• Particles of dirt and hair accumulate on the caster wheel axle and threaded axle of the caster fork over time.
This makes the steering stiffer. Regularly remove dirt and oil the axles. See the section “Approach in case of
stiffness”.
• The drive wheels are equipped with a quick-release axle system as standard equipment. To keep this system
operational, ensure that no dirt adheres to the quick-release axle or receiver bushing. Periodically lubricate the
quick-release axle lightly with thin, resin-free oil (sewing machine oil).
• The drive wheels may be equipped with optional clamp axles. It is essential to ensure that particles of dirt do
not get between the axle and receiver bushing. The system is tolerance-free. Particles of dirt can prevent the
clamp axle from being removed.
• The spokes should be lightly lubricated with petroleum jelly on occasion.
• If the wheelchair becomes wet, it should be rubbed dry again.
10.2 Inspection
• For reasons of product safety, an annual inspection is to be performed on this wheelchair type according to the
list below.
• Under more severe conditions – e.g. in case of increased strain – the user should have an interim inspection of
the frame and chassis performed.
• Product inspections may only be carried out by qualified personnel.
Inspection task Check off after
completion
Remove the seat cushion and back support pad Preparation
Clean the product
Check the frame for damage and corrosion
Check welding seams for the formation of cracks
Check wear and tear parts (e.g. tyres, bearings) for wear and dirt
Visual inspection
Check add-on components and accessories for damage and cor­
rosion
Check all screw connections for firm fit
Check the attachment of all add-on components
General inspection
Check hook-and-loop closures, add-on components and
accessories
Drive wheels Check that wheel mounts are securely fastened
32
Maintenance and repair
Invader 480S26=20000_K