OTE Speedport Entry 2i, Руководство по управлению техническим обслуживанием

Страница: 49 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-33
l SSID2 is reserved for the FON service.
l Click All On to select all Port Binding types.
l Click All Off to cancel all Port Binding types.
3. Click Apply button to apply the changes.
– End of Steps –
3.10.
Configure the Dynamic Routing
The section describes how to configure dynamic routing.
Steps
1. On the main page of the Speedport Entry 2i, select Internet > Dynamic Routing to
go to the Dynamic Routing page.
The page is shown in Figure 3-26 .
Figure 3-26 Dynamic Routing
The RIP configuration options vary with the RIP Version value.
RIP
2. Configure the RIP parameters.
Table 3-20 lists the RIP parameters.
Table 3-20 RIP parameters
Parameter Description
Enable RIP Click On to enable the RIP function.
Note:
Note: