SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-33
l
SSID2
is reserved for the FON service.
l Click
All On
to select all Port Binding types.
l Click
All Off
to cancel all Port Binding types.
3. Click
Apply
button to apply the changes.
– End of Steps –
3.10.
Configure the Dynamic Routing
The section describes how to configure dynamic routing.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > Dynamic Routing
to
go to the
Dynamic Routing
page.
The page is shown in
Figure 3-26 Dynamic Routing
The RIP configuration options vary with the
RIP Version
value.
RIP
2. Configure the RIP parameters.
lists the RIP parameters.
Table 3-20 RIP parameters
Parameter
Description
Enable RIP
Click
On
to enable the RIP function.
Note:
Note:
