SJ-20162405182123-002|2016-05-24 (R2.0)
Product Overview
1-5
1.3.2.
ISDN line
If you have an ISDN line, connect your Speedport Entry 2i, as it is shown in the following
Figure 1-5 Connection of Speedport Entry 2i to an ISDN line
1.
Disconnect the cable that connects the ISDN (NT1) device to the telephone plug and connect it to the
black port of the splitter.
2.
Α
.
Use the
blue
cable to connect the
blue
port of the splitter with the indication
“LINE”
to the
telephone plug.
Β
.
Following, using the
gray
cable, connect the
gray
port of the splitter with the indication
“MODEM”
to the gray port of Speedport Entry 2i with the indication
“DSL”
.
3.
Use the
yellow
ETHERNET cable to connect the ETHERNET port of your computer to one of the first
yellow ports of the Speedport Entry 2i with the indications
LAN1
,
LAN2
or
LAN3
.
The port with the
purple
indication (
STB
) is used exclusively for the connection of the codec which is
required for the OTE TV service.
4.
Connect the power supply adapter to the POWER jacket of Speedport Entry 2i and following,
connect it to the power plug. The LEDs for Power, DSL, Online, Telephony, Service and WLAN will
flash instantly.
