OTE Speedport Entry 2i, Руководство по управлению техническим обслуживанием

Страница: 48 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
3-32
page, the page as shown in Figure 3-24 .
Figure 3-24 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 3-19 lists the SNTP parameters.
Table 3-19 Parameter Descriptions for the SNTP
Parameter Description
Time Zone Time zone.
Primary NTP Server Address IP address or domain name of the active NTP server.
Secondary NTP Server Address IP address or domain name of the standby NTP server.
DSCP Range: 0–63.
3. Click Apply button to apply the changes.
– End of Steps –
3.9.
Configure the Port Binding
The section describes how to configure Port Binding. Port Binding provides the
parameters of Port Binding configuration features.
Steps
1. On the main page of the Speedport Entry 2i, select Internet > Port Binding to go to
the Port Binding page, the page as shown in Figure 3-25 .
Figure 3-25 Port Binding Configuration Page
2. Select the WAN connection , and select the LAN port or SSID that you want to bind.